Gutter Guards are an important component of any home. These guards protect your guttering from leaves, sticks, and other debris that would otherwise clog the system and cause damage to both gutters and roofing. And it’s not just about functionality: Gutter Guards also help keep the exterior aesthetic of your property looking good by preventing dirt, moss, algae, and mold from building up on your gutters.

A lot can go wrong with a home if you’re not paying attention to detail and this is especially true when it comes to these two components which will often get overlooked or ignored in favor of more showy features like landscaping or stonework. But even though they may seem less glamorous than such items, gutters play a very important role in keeping your home in good condition and they need to be kept clean. So why do you need gutter guards?

This is a question of function, not aesthetics. It’s true that gutter guards do look nicer than unsightly gutter grime and mold but it’s only because they keep your gutters cleaner and more functional. There are other reasons to use gutter guards too such as the prevention of leaf damage, pesky critters, or gutter leaks which can cause water damage to the interior of your home. Gutter Guards are a great addition if you’re looking to keep an eye on your gutters and roofing by reducing the amount of debris that gets trapped in them, i.e.; how much gunk they collect.

Leafshield Gutter Guards - How to install gutter guards


How to install gutter guards

Gutter guards are an economical way to protect your home from water damage

Most gutter guards cost less than $100, and if you factor in how much it can potentially save you on repair costs or fines from building codes, they may even be able to pay for themselves. In a number of cases, the professional installation process is not only an option that most homeowners forget about but also one that’s necessary. Not only do you need to be trained on how to install gutter guards but gutters themselves are not always built the same meaning that instructions and measurements for installation will vary from one homeowner to another. Professional help is often necessary because this kind of home improvement project does require a certain level of expertise in order to complete it correctly.

An additional advantage of hiring a professional to install gutter guards is that the installation will likely also require some cleaning of your gutters. This is an important step because it ensures that both your gutter guards and guttering are properly working together to keep water away from your home. Having these two components in good working order help prevent problems such as ice damming which may not only damage your gutters but also cause water to seep into the walls of your home.

Having them professionally installed will ensure that they are properly aligned and secured so that there is no risk of them being blown away by the wind or otherwise becoming dislodged. Let’s look at some of the things that you should keep in mind when installing gutter guards in your home.

How to install gutter guards without damaging your roof and gutters

When installing Gutter Guards you need to be very careful so that they don’t damage either your roof or gutters. First, ensure that your gutters are still in good shape even after cleaning, and remember that cleaning will not remove any structural damage already caused by wear and tear. You should also have the area around the guttering cleaned so there are no obstructions or debris which could cause the guards to come loose.

Finally, you’ll want to make sure that your gutters and guards are installed with the proper pitch so that water will still drain properly even when dirt does build up; it’s easy to forget about a gutter guard if it doesn’t fully do its job. You also want to make sure that you choose the right gutter guard for your home. There are “fixed in place” guards or those that fit a specific brand of gutters that snap into place so they don’t need any additional hardware. Gutter covers on the other hand can be fitted by tying them with either velcro straps or hooks, or they can also attach to the guttering with a spring-loaded clip.

Make sure you use a sealant or silicone

Installing Gutter Guards isn’t all that different when you have a sloping roof, although there are a few things that you need to keep in mind for this type of installation: first, you should check the angle of your roof and choose gutter guards that can be adjusted for such an incline; second, you need to seal joints where the gutter guards meet the roof to avoid any leaks. To do this, first, clean off the exterior surface of your guttering and then apply a bead of silicone or caulk along the joint.

If you’ve installed new aluminum gutters, then you’ve already installed the base plate that should be used to hold the gutter guard in place. If, however, you’re working with older types of gutters and want to install a base plate as well, you can use screws or nails to secure these pieces in place. With aluminum gutters, only one screw is really needed per joint.

For other types of gutters, you might need several nails, screws, or even a nail gun to firmly hold the base plate in place. In addition, if you are installing plastic gutters then make sure that the gutter guard is secured to the outer edge of the gutter so that it does not interfere with the flow of water coming out of the gutter. There are also some cases where you might need to drill holes in order to affix a base plate.

Once your base plate is secured, you can slide the gutter guards into place and secure them with screws or nails at each end. Make sure that they fit snugly and will not come apart before moving on to the next step.

When installing gutter guards on a sloping roof, you will need to consider where exactly they are going to be placed. For some sloping roofs, it might be best to put the gutter guards on the outside of the slope while this is not always true for other cases.


    Check periodically for any signs of wear and tear and replace as needed.

    If you have an older house or are replacing your gutters, you might find that the installation process does not go as smoothly as hoped. In order to get the most out of your new gutter guards, it is vital to ensure a proper installation from the start.

    To do this, first, take careful measurements and be sure that they correspond to the size of gutter guards that you intend to purchase. There are a number of variables at play here because not all companies make their products for every type and shape of a gutter.

    To check how well your new gutter guards fit, simply slide them into place while carefully making sure that they do not fall down or come loose at any point.

    Make sure you use the correct screws or nails to fasten them down, as improper hardware could result in the gutter guards coming loose during a heavy rainstorm. Make sure that you can easily remove the gutter guards once it’s time for maintenance and that extra pieces do not jut out from underneath your roofline.

    Gutter Cleaning Eugene, OR